Assignment1 - The Blister

-
Finished product


Process


Step1: Cut out the blister shapes from the wooden template.Sandwiched the aluminium sheet between them and use screws to secure them, then blocked on the table.

Step2: Hammer the Blister roughly with a nylon hammer.  




Step3: Use the nylon hammer with a stake to clear the edge and make the blister more smooth. The tip is keep hammer the stake at one point and move the head of the stake around to shape the radius.






 Repeat the step3 for more quality

Step4:  Cut 20mm offset from the blister and file the edge.

Finished Blister









Comments

Post a Comment

Popular posts from this blog

Assignment3 - Reflection

-
Image
Reflection Summary  Before studying this course, I thought that is really hard to create a curved or reverse curve shapes with out mechanical technique, or 3D printing technology. I would like to know how students in the industrial design discipline make their products especially with metal material. In architecture discipline there is few chance to use metal to make model, but models like Frank Gehry' Walt Disney Concert Hall have to use metal sheet to show the movement of the form and reflective materials. From this course I learned how to make templates and use the templates to create shapes with metal sheets with different,  and the characteristics and capability of shrinking and stretching. And a well prepared template and tool choice can achieve a better result. In the project Reverse I was quite inspired by the beautiful shape. I didn't have time to actually make a design and model, but I made a image to show my idea of reverse roof. I think I can try
Read more

Assignment2 - The Fuel Tank

-
Image
Stage 1: In Group of 10 make the 1:1 Fuel Tank Template  We chose the Custom tank for a CB550, and used Rhino to prepare the Digital Tank File Stage 2: 'Slice' and Laser cutting  We used Autodesk Slicer for fusion360 to 'slice' the Digital fuel tank. for the Template we decided to   make 13x15 slices. The software automatically layout the slicer, but for saving time and material we rearrange the layout in Illustrate. Then, we were ready to do the laser cutting. The automatically generated slice file has innumerable line segment, so it still took us a long time to finish all the laser cutting. Stage 3: Assemble the template We glued all the template to make it more stable. Stage 4: In the small group we divide the tank into three parts  Prepare the aluminium sheet ,used A3 paper to measure the size of material I need and the and marked the shape and fuel tank contours. Then used Guillotine  to cut the sheet. Stage
Read more